If you want to learn more about window box plans, we recommend you to pay attention to the instructions described in the article. Work with good judgement and browse through the rest of the woodworking projects that are featured on this website, if you want to get a professional result. Make sure the corners are right-angled and lock everything tightly.
There are many designs and plans to choose from before starting the actual assembly. Invest in the best materials you can afford, such as pine, redwood or cedar and select the slats that are straight and in a good visual condition. Align the components at both ends before inserting the screws. Add waterproof glue to the joints in order to enhance the rigidity of the structure.
Window Box Plans
Building the window box
Materials
- 1 – 2 pieces of 1×2 lumber – 11 3/4”, 2 pieces – 5″ SUPPORTS
- 2 – 2 pieces of 1×6 lumber – 5″ TRIMS
- 3 – 2 pieces of 1×6 lumber- 30″ FRAME
- 4 – 1 piece of 1×6 lumber – 30″ BOTTOM
- 5 – 2 pieces of 1×6 lumber – 6″ ENDS
Tools
- Hammer, Tape measure, Carpentry square
- Miter saw, Drill machinery, Screwdriver, Sander, Router
- Safety Gloves, Safety Glasses, Respiratory Mask
Time
- One day
Building a window box
Building the frame of the window box
The first step of the project is to build the frame of the planter. Cut the components at the right size and lock them together with galvanized screws. Add waterproof glue to the joints in order to enhance the rigidity of the structure. Drill drainage holes through the bottom components, before attaching the back component.
Building the end components
Cut the ends of the window box by using the information from the diagram. Mark the cut lines on the piece of lumber and adjust their size with a circular saw. Smooth the cut lines with sandpaper before attaching them into place. Drill pilot holes through the bottom component and insert the screws into the side components.
Fitting the front face
Attach the face of the window box to the structure, by using finishing nails. Align the components with great care and add waterproof glue to enhance the bond of the components.
Building the supports
If you need to build supports for the window box, we recommend you to pay attention to the instructions described in the plans. Cut the 1×2 lumber at the right size and lock them together with galvanized screws. Check if the corners are square and create rigid joints, before inserting the screws.
Fitting the trim
In order to enhance the look of the window box supports, we recommend you to attach nice trims. Leave no gaps between the components and attach them to the house.
Window box plans
Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough to support the soil. Make sure there are no protruding screws or sharp edges.
PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.
This diy project was about window box plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.