Outdoor Plant Stand Plans

If you want to learn more about how to build an outdoor plant stand, we recommend you to pay attention to the instructions described in the article. Select the right outdoor plant stand plans before starting the construction process. Work with attention and plan every aspect of the construction from the very beginning, in order to keep the costs under control and to save time. Cedar, pine or redwood would provide a decent compromise between looks and durability.

Use a circular saw to adjust the size of the components, after marking accurate cut lines. Smooth the cut edges with a piece of sandpaper and remove the residues before fitting them into place. Drill pocket holes before inserting the screws, in order to prevent the wood from splitting and to create a rigid structure. Check if the corners are right-angled after fitting each component, as they usually move from position easily.

Outdoor Plant Stand Plans

Building a plant stand

Materials

• 1 – 4 pieces of 1×3 lumber – 53 1/2″ LEGS
• 2 – 2 pieces of 1×3 lumber – 12″, 2 pieces – 15″ 3xFRAME
• 3 – 3 pieces of 3/4″ plywood – 12″x12″ SUPPORTS

• 3 pieces of 1×3 lumber – 10 ft
• 1 piece of 3/4″ plywood – 2’x2′
• wood stain
• wood glue

Tools

• Hammer, Tape measure, Carpentry square
• Miter saw, Drill machinery, Screwdriver, Sander, Router
• Safety Gloves, Safety Glasses, Respiratory Mask

Time

• One day

Building a plant stand

Building the frames

The first step of the woodworking project is to build the frame of the plant stand. Cut the components out of 1×3 lumber, making sure you take accurate measurements. Drill pocket holes at both ends of the side components and secure them to the perpendicular components. Make sure the corners are right-angled before inserting the screws.

Attaching the legs

The next step of the project is to attach the legs to the frames. Take accurate measurements and plumb the legs with a spirit level before securing the legs to the frames. Drill pilot holes to prevent the wood from splitting. Make sure the corners are right-angled and leave no gaps between the components.

Fitting the supports

Cut the supports out of 3/4″ plywood and drill pocket holes along the edges. Fit the supports inside the frames and secure them into place with galvanized screws. Add waterproof glue to joints, in order to create a rigid structure.

Outdoor plant stand plans

Last but not least, you should take care of the finishing touches. Make sure there are no gaps between the components. See free plans for a nice leopold plant stand, here on my blog, as well.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with 120-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay.

This diy project was about outdoor plant stand plans. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets. LIKE us on Facebook if you want to be the first that gets our latest projects.