If you want to learn more about how to build a pedestal table, we recommend you to pay attention to the article. There are many things that you should take into account if you want to get a professional result. For example, we recommend you to select the right pedestal table plans and to invest in high quality materials (pine, cedar or redwood), if you want to get a professional result.
There are many designs and plans to choose from when building a pedestal table, so we recommend you to pay attention to the tips. Select the slats with good judgement, as they should be in a good condition and perfectly straight. Use proper tools when adjusting the size of the wooden components, especially when building the round tabletop. Smooth the edges with a piece of sandpaper and remove the residues with a damp cloth.
Pedestal Table Plans
- 1 – 4 pieces of 1×3 lumber – 20 1/4″ BASE
- 2 – 4 pieces of 1×3 lumber – 13 1/2″, 2 pieces – 28 3/4″, 2 pieces – 34 1/4″ LEGS
- 3 – 1 pieces of 1×36 lumber – 36″ in diameter TABLETOP
- Hammer, Tape measure, Carpentry square
- Miter saw, Drill machinery, Screwdriver, Sander, Router
- Safety Gloves, Safety Glasses, Respiratory Mask
- One day
Building a pedestal table
The first step of the woodworking project is to build the base of the pedestal table. In order to get a professional result, we recommend you to cut the 1×12 slats at the right size and to assemble them together with galvanized screws and waterproof glue. Align the components at both ends before drilling pocket holes and inserting the 1 1/4″ screws. Add waterproof glue to the joints, in order to enhance the rigidity of the frame.
Cutting the round tabletop is a complex process, as you need to trace an accurate guideline and to get the job done with a jigsaw. Smooth the cut edges with a piece of sandpaper and center the base to the tabletop, as shown in the image. Drill pocket holes at the bottom of the base components and insert galvanized screws into the tabletop. Add waterproof glue to enhance the rigidity of the structure.
In order to get a professional result, we recommend you to attach 1×4 legs to the base of the pedestal table. Cut the components at the right size and shape before drilling pocket holes at one end. Insert galvanized screws to secure them to the base of the pedestal table. Add waterproof glue to enhance the rigidity of the joints.
Last but not least, you should take care of the finishing touches. Check if the components are secured into place properly and if the structure is rigid. Make sure there are no protruding screws or sharp edges that could injure you.
PRO TIP: Fill the holes with a good wood filler and smooth the surface with 120-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay.
This diy project was about pedestal table plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets. LIKE us on Facebook if you want to be the first that gets our latest projects.