If you want to learn more about building a toy box, we recommend you to pay attention to the instructions described in the article. Work with attention and invest in high-quality materials if you want to get the job done in a professional manner. Choose the right toy box plans for your needs and plan every step of the project from the very beginning, if you want to get a professional result.
Always take accurate measurements and adjust the size of the components at the right dimensions before locking them together. Use a good circular saw to cut the components at the right size and smooth the edges with sandpaper before locking them together. Pre-drill the components before inserting the screws into place, to prevent the wood from splitting. Work with attention and with good judgement.
Toy Box Plans Free
Building a toy box
Materials
- 1 – 2 pieces of 1×4 lumber – 45”, 2 pieces – 21″ FRAME
- 2 – 13 pieces of 1×4 lumber – 22 1/2″” FLOOR
- 3 – 4 pieces of 2×2 lumber – 21″ LEGS
- 4 – 12 pieces of 1×4 lumber – 21″ SLATS
- 5 – 1 pieces of 2×2 lumber – 48″ SUPPORT
- 6 – 14 pieces of 1×4 lumber – 21 3/4″, 2 pieces of 1×2 lumber – 45 1/2″ LID [
Tools
- Hammer, Tape measure, Carpentry square
- Miter saw, Drill machinery, Screwdriver, Sander, Router
- Safety Gloves, Safety Glasses, Respiratory Mask
Time
- One day
Building a toy box
Attaching the floor frame
The first step of the project is to attach the floor frame to the corner legs of the toy box. Drill pocket holes at both ends of the components and secure them to the legs with 1 1/4″ galvanized screws. Add waterproof glue to the joints, in order to create a rigid frame.
Attaching the bottom slats
The next step of the woodworking project is to attach the 1×4 slats to the frame of the toy box, as shown in the plans. Make sure you leave no gaps between the slats before inserting the screws and drill pilot holes to prevent the wood from splitting.
Attaching the side walls
Fit the 1×6 slats between the side legs, as shown in the image. Drill pilot holes at both ends and align them properly before inserting the 1 1/4″ galvanized screws. Leave no gaps between the slats or use tongue and groove boards.
Attaching the slats
Continue the woodworking project by attaching the front and back walls into place. Make sure the corners are right-angled before inserting the screws and use the same techniques described above to get the job done in a professional manner.
Building the lid
Building the lid is a straight-forward job, but you need to take accurate measurements and to lock all the components together tightly. Lay the slats on a level surface, leave no gaps between the slats and fit the supports to lock them together. Secure the trims to the lid with finishing nails and waterproof glue.
Fitting the back support
Build the back support and attach the lid into place by using several metal hinges. Use a circular saw to make the longitudinal angle cut. Leave no gaps between the components and lock them together as shown in the image.
Toy box plans
Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough to support the soil. Make sure there are no protruding screws or sharp edges.
PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.
This diy project was about toy box plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.