If you want to learn more about 8×8 firewood shed plans that can hold up to 3 cords, you have to take a close look over the free plans in the article. This shed with a lean to roof has a large opening to the front and it features the other 3 walls covered with 1×6 boards. This wood storage shed features a sturdy but simple structure, so you can build this shed as a diy project. This square wood shed is easy to make and friendly with the budget.
If you want to get the job done in a professional manner, we recommend you to plan everything with attention, as to prevent costly mistakes and to build a professional garden project. Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather. Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather.
8×8 Firewood Shed Plans – 3 Cord Wood Storage
Building-a-8×8-firewood-shed
Materials
- 1 – 3 pieces of 4×4 lumber – 8 ft long SKIDS
- 2 – 2 pieces of 2×6 lumber – 8 ft long, 5 pieces – 93″ long FLOOR FRAME
- 3 – 21 pieces of 2×4 lumber – 8 ft long FLOOR
- 4,5 – 2 pieces of 2×4 lumber – 86 3/4″ long, 2 pieces – 78 1/2″ long, 2 pieces – 54 1/2″ long, 2 pieces – 61 3/4″ long POSTS
- 6 – 2 pieces of 2×6 lumber – 10 ft long SUPPORT BEAMS
- 7 – 14 pieces of 1×6 lumber – 96″ long, 6 pieces – 94 1/2″ long WALLS
- 8 – 6 pieces of 2×6 lumber – 118 1/2″ long RAFTERS
- 9 – 2 pieces of 1×8 lumber – 10 ft long TRIMS
- 10 – 9 pieces of 1×4 lumber – 10 ft long PURLINS
- 11 – 4 pieces of metal roofing – 3’x10′ ROOFING
- 3 pieces of 4×4 PT lumber – 8 ft
- 7 pieces of 2×6 lumber – 8 ft
- 29 pieces of 2×4 lumber – 8 ft
- 8 pieces of 2×6 lumber – 10 ft
- 20 pieces of 1×6 lumber – 8 ft
- 2 pieces of 1×8 lumber – 10 ft
- 9 pieces of 1×4 lumber – 10 ft
- 4 pieces of metal roofing – 3’x10′
- 1 1/2″ structural screws
- 20 rafter ties
- 200 pieces 1 5/8″ screws
- 50 pieces of 3 1/2″ screws
- 24 pieces of 3” lag screws
- 250 pieces of 2 1/2″ screws
- wood glue, stain/paint
Tools
- Hammer, Tape measure, Carpentry square
- Miter saw, Drill machinery, Screwdriver, Sander, Router
- Safety Gloves, Safety Glasses, Respiratory Mask
Time
- One week
STEP 1: Building the shed floor
Building-a-8×8-firewood-shed
The first step of the project is to build the floor frame for the wood shed. As you can see in the diagram, you need to cut the joists from 2×6 lumber. Lay the components on a level surface and align the edges flush.
Drill pilot holes and insert 3 1/2″ screws to assemble the frame. Make sure the corners are square. Place the joists every 24″ on center, or if you have an extra budget, you can place them every 16″ OC. Measure the diagonals and make adjustments until they are equal.
Floor-frame—8×8-firewood-shed
Select the location for wood shed and remove the vegetation layer. Spread a 2-3″ layer of gravel under the shed floor, so you can protect the floor from moisture. Next, lay the 4×4 skids under the floor frame and lock them together with rafter ties and 1 1/2″ structural screws.
The skids will lift the floor frame from the ground to protect the components from moisture. Use pressure treated lumber for the floor skids, at least, as they will be exposed to moisture.
Fitting the slats to the floor
Fit the 2×4 boards to the floor of the wood storage shed. Align the edges flush and fit 1 1/4″ pieces between the boards to create even gaps. Drill pilot holes through the slats and insert 2 1/2″ screws to lock the boards to the floor frame. The gaps between the boards will help with the drying out process, as the air flow will circulate from all directions.
STEP 2: Building the wood shed wall frames
Posts-for-8×8-firewood-shed
Use 2×4 lumber for the vertical posts of the wood shed. Cut the posts at the right dimensions and then assemble them together tightly, as shown in the diagram. Leave no gaps between the boards and add glue to the joint. Drill pilot holes and insert 2 1/2″ screws to assemble the corner posts.
Fitting-the-posts
Attach the posts to the firewood shed floor. Plumb the posts with a spirit level. Drill pilot holes and insert 3″ lag screws to lock them to the floor frame. Insert the screws from both sides of the corner posts. In this manner, the posts will be secured tightly to the floor frame.
Firewood-shed-plans—fitting-the-support-beams
Use 2×6 lumber for the support beams. Fit the beams to the front and to the back of the shed. Drill pilot holes and insert 3″ lag screws into the posts. Use a spirit level to make sure the beams are perfectly horizontal.
Side wall slats
Use 1×6 slats for the side walls. Place 3″ spacers between the slats, to create even gaps. Drill pilot holes and insert 1 5/8″ screws to secure the slats to the posts.
Back wall slats
Attach the 1×6 slats to the back of the firewood shed. Place the 3″ spacers to create even gaps between the slats. Drill pilot holes and insert 1 5/8″ screws to lock the slats into place.
STEP 3: Building the lean to shed roof
Rafters-for-8×8-firewood-shed
Next, build the rafters for the roof from 2×6 lumber. Mark the cut lines to the beams, as shown in the diagram. Use a circular saw for the birdsmouth cuts.
fitting-the-firewood-shed
Fit the rafters to the support beams. Place the supports every 24″ on center. Use rafter ties to secure the rafters into place tightly. Use 1 1/2″ structural screws to secure the ties to the components.
Fitting-the-purlins
Fit the 1×4 purlins to the top of the shed. Place the purlins every 16″ on center. Use 1 5/8″ screws to secure the slats to the rafters.
Fitting the roof trims
Attach the 1×8 trims to the front and to the back of the shed roof. Align the edges flush, drill pilot holes and insert 1 5/8″ screws, to lock them into place tightly.
3-cord-firewood-shed—8×8-wood-shed
Next, attach the metal roof sheets to the top of the firewood shed. Align the edges and secure the sheets to the purlins with 3/4″ roofing screws.
Building-a-8×8-firewood-shed
Last but not least, you need to take care of the finishing touches. Fill the gaps with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to protect the shed components from the elements and to enhance the look of the project.
How-to-make-a-3-cord-wood-shed
This shed can store up to 3 cords of firewood. The lean to shape of the roof makes for a straight forward process and keeps the costs down. In addition, you can save space in your backyard by building the shed next to the property line.
8×8-firewood-shed—side-view
You can see all my storage shed plans HERE. See plans for a 1 cord wood shed and plans for a 2 cord wood shed.
This diy project was about 3 cord 8×8 firewood shed plans. If you have enjoyed the free project, I recommend you to share it with your friends, by using the social media widgets. You can always save the plans as PDF or Print them using the floating widget on the left side of the screen (working only on PC or laptop).