If you want to learn more about large big green egg plans, you have to take a close look over the instructions described in the article. There are so many designs and plans to choose from, that we really recommend you to browse through the related plans before buying the materials and starting the assembly. This project will help you make a basic outdoor kitchen at the expense of a few slats and screws. check out all furniture plans HERE.
If you want to get the job done in a professional manner, we recommend you to plan everything with attention, as to prevent costly mistakes and to build a professional garden swing. Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather. Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather.
Â
Â
Large Big Green Egg Plans
Building the big green egg table
Â
Materials
- A – 4 pieces of 2×4 lumber – 31″ LEGS
- B – 5 pieces of 2×4 lumber – 24″, 1 piece – 42″ long BRACES
- C – 2 piece of 2×4 lumber – 48″ APRONS
- D – 6 pieces of 1×4 lumber – 50″ TABLETOP
- E – 4 pieces of 1×6 lumber – 45″ long SHELF
- 5 pieces of 2×4 lumber – 8 ft
- 3 pieces of 1×4 lumber – 10 ft
- 2 pieces of 1×6 lumber – 8 ft
- 100 pieces of 2 1/2″ screws
- 100 pieces of 1 5/8″ screws
- wood stain
Tools
- Hammer, Tape measure, Carpentry square
- Miter saw, Drill machinery, Screwdriver, Sander, Router
- Safety Gloves, Safety Glasses, Respiratory Mask
Time
- One day
Â
Â
Made from this plans
Â
Â
How to build a Big Green Egg
Building the sides
Build the sides for the table from 2×4 lumber. Drill pilot holes through the braces and insert 2 1/2″ screws into the legs.
Assembling the table
Assemble the table by joining the sides together. Use 2×4 lumber for the aprons. Drill pilot holes at both ends and insert 2 1/2″ screws into the legs.
Fitting the stretcher
Fit a 2×4 stretcher to the base of the table. Drill pilot holes through the braces and insert 2 1/2″ screws into the stretcher.
Fitting the bottom shelves
Attach 1×6 slats to the bottom supports to create the shelf. Drill pilot holes and insert 1 5/8″ screws to lock the slats into place.
Fitting the tabletop support
Fit a 2×4 support to the frame of the tabletop. Drill pilot holes and insert 2 1/2″ screws to lock the frame together tightly.
Attaching the tabletop
Attach the 1×4 slats to the tabletop of the green egg table. Drill pocket holes through the frame and insert 1 1/4″ screws into the tabletop slats.
Cutting the out the tabletop hole
Mark the center of the square and mark the circle with a pencil. Use a jigsaw to make the round cuts. You can add diagonal braces to the corners of the frame, to support the tabletop slats. Make 45 degree cuts at both ends of the braces and fit them to the frame with 2 1/2″ screws.
Large Big Green Egg Plans
Fit the big green egg to the table, making sure you use a paver under it. You can see plans for an XL green egg table HERE.
Large Big Green Egg Plans
Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough for your garden. Make sure there are no protruding screws or sharp edges.
PRO TIP:Â Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.
Â
Â
This diy project was about large big green egg table plans. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.