If you want to learn more about building a picnic bench, we recommend you to pay attention to the instructions described in the article. Select the right picnic bench plans for your needs before starting the actual construction project. There are so many designs and plans to choose from, that we really recommend you to browse through the related plans before buying the materials and starting the assembly. Work with attention and invest in high quality materials.
If you want to get the job done in a professional manner, we recommend you to plan everything with attention, as to prevent costly mistakes and to build a professional bench. Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather. Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather.
RELATED PLANS:
Picnic Bench Plans
Building a picnic bench
Materials
- 1 – 2 pieces of 2×12 lumber – 15” LEGS
- 2 – 1 pieces of 2×6 lumber – 39″ STRETCHER
- 3 – 2 pieces of 2×12 lumber – 48″ SEAT
- 1 piece of 2×12 lumber – 8 ft
- 1 piece of 2×6 lumber – 4 ft
- 50 pieces of 2 1/2″ screws
- wood stain
- wood glue
Tools
- Hammer, Tape measure, Carpentry square
- Miter saw, Drill machinery, Screwdriver, Sander, Router
- Safety Gloves, Safety Glasses, Respiratory Mask
Time
- One day
Building a picnic bench
Building the legs
The first step of the project is to build the legs of the picnic bench. Cut the components out of 2×12 lumber and make sure you cut out the notch at the bottom of the legs, in order to get the job done in a professional manner. Smooth the cut edges with sandpaper, as to get a professional result.
Fitting the seat support
Drill pocket holes at both ends of the stretcher and secure it to the legs, by using 2 1/2″ screws. Add waterproof glue to the joints and make sure the corners are right-angled. Center the stretcher to the legs, in order to get a symmetrical look.
Attaching the seat
Cut the seat out of 2×12 lumber and make the corners decorative, in order to get a professional appearance. Smooth the cut edges with sandpaper and remove the residues thoroughly.
Picnic table plans
Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough for your garden. Make sure there are no protruding screws or sharp edges.
PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.
This diy project was about picnic bench plans. If you have enjoyed the free project, we recommend you to LIKE and SHARE it with your friends, by using the social media widgets.