This step by step diy woodworking project is about raised planter box plans. If you don’t have a proper backyard but you still want to grow your own vegetables by yourself, we recommend you to pay attention to this article. Make sure you read the instructions with great care and check out the step by step diagrams. Work with attention and ask a friend to assist you if necessary.
There are many aspects that you should take into account when building a raised planter box. Therefore, we recommend you to plan every aspect of the woodworking project to suit your needs. Don’t be afraid to make adjustments to the designs and to the size of the planter box, especially if it will not fit in your kitchen or on your patio. Select the wooden components, making sure they are all straight and in a good condition.
Building a raised planter box
Building a raised garden box
Materials
- 1 – 4 pieces of 2×2 lumber – 33″ LEGS
- 2 – 2 piece of 2×2 lumber – 57”, 9 pieces of 1×4 – 22″ BOTTOM SHELF
- 3 – 6 pieces of 2×6 lumber – 19″, 6 pieces – 57″ SLATS
- 4 – 2 pieces of 2×2 lumber – 57″, 1 piece of 3/4″ plywood – 19″ x 57″ FLOOR
Tools
- Hammer, Tape measure, Carpentry square
- Miter saw, Drill machinery, Screwdriver, Sander, Router
- Safety Gloves, Safety Glasses, Respiratory Mask
Time
- One day
Raised Planter Box Plans
Building the frame of the planter
The first step of the woodworking project is to build the frame of the planter. As you can see in the plans, we recommend you to use 2×2 lumber (cedar, pine or redwood) as the components should be highly durable and weather-resistant.
Building the bottom shelf
Continue the woodworking project by attaching the 1×4 slats to the bottom of the raised planter box, in order to create a nice storage shelf. Drill pilot holes at both ends of slats and secure them to the supports with 1 1/4″ screws and waterproof glue.
Building the planter box
Building the actual planter is not a complex project, but you need to take accurate measurements and to use quality slats. Plumb the legs of the planter with a spirit level and drill pocket holes at both ends of the 2×6 slats before locking them into place. Don’t leave gaps between the slats in order to get a professional result.
Attaching the cleats
It is essential to attach 1×1 cleats to the bottom of the raised planter before attaching the floor into place. Align the cleats into place and lock them to the slats with 1 1/4″ screws. Add waterproof glue to the joints in order to create a rigid structure.
Attaching the floor
The easiest way to get the job done in a professional manner is to use 3/4″ plywood. Mark the cut lines on a piece of plywood and get the job done with a circular saw. Place the floor into place and secure it into place with finishing nails. Check if the corners of the planter box are right-angled by using a carpentry square.
Raised planter box plans
Last but not least, you should take care of the finishing touches. Check if the components are secured into place properly and if the frame is rigid. Make sure there are no protruding screws or sharp edges that could injure you.
PRO TIP: Fill the holes with a good wood filler and smooth the surface with 120-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay.
This diy project was about raised planter box plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets. LIKE us on facebook if you want to be the first that gets our latest projects.