Free Doll House Plans Free

Thomas 0

If you want to learn more about how to build a doll house, we recommend you to pay attention to the instructions described in the article. Work with good judgement and browse through the rest of the woodworking projects that are featured on this website, if you want to get a professional result. Make sure the corners are right-angled and lock everything tightly.

There are many designs and plans to choose from before starting the actual assembly. Invest in the best materials you can afford, such as pine, redwood or cedar and select the slats that are straight and in a good visual condition. Align the components at both ends before inserting the screws. Add waterproof glue to the joints in order to enhance the rigidity of the structure.

 

 

Free Doll House Plans Free

Building a doll house

Building a doll house

 

  • A – 2 pieces of 1×12 lumber – 48” FRAME
  • B – 3 pieces of 1×12 lumber – 42″, 3 pieces – 12″ SHELVES
  • C – 1 piece of 1/4′ plywood – 43 1/2″x48″ BACK
  • D – 2 pieces of 1×3 lumber – 12 1/4″, 1 piece – 45″ TRIMS
  • E – 1 pieces of 1×14 lumber – 45″ ROOF
  • F – 2 pieces of 3/4″ plywood – 38″x21 3/4″ DOORS
  • G – 1×1 lumber – 1/4″ thick TRIMS 
  • One day

 

 

Building a doll house

Building the sides of the doll house

Building the sides of the doll house

The first step of the woodworking project is to build the sides of the doll house. As you can easily notice in the plans, we recommend you to cut the side walls out of 1×12 lumber, using the pattern and instructions described in the article. Cut out the windows with a jigsaw and smooth the edges with sandpaper.

Building the shelves

Building the shelves

Continue the woodworking project by fitting the shelves between the two sides of the doll house. As you can easily notice in the plans, we recommend you to cut the 1×12 slats at the right size and to fit them between the side walls. Make sure the corners are right-angled and drill pocket holes at both ends of the components before inserting the 1 1/4″ screws.

Attaching the roof

Attaching the roof

Attach the roof into place, after cutting the back edge at 60 degrees. Secure the piece of lumber to the frame with finishing nails. Add waterproof glue to the joints, in order to create a rigid structure.

Attaching the back wall

Attaching the back wall

Cut a piece of 1/4″ plywood at the dimensions shown in the diagram and secure it to the back of the doll house with finishing nails. Leave no gaps between the components and make sure the corners are right-angled.

Fitting the side trims

Fitting the side trims

If you want to enhance the look of the doll house, we recommend you to attach 1×1 (1/4″ thick) trims around the windows. Secure the trims to the side walls with waterproof glue or finishing nails.

Attaching the bottom trims

Attaching the bottom trims

Attaching the trims to the base of the doll house is a straight-forward project that will add value to you project. Work with attention and align the components before securing the trims to the frame with finishing nails and waterproof glue.

Building the front doors

Building the front doors

Although this step is optional, building the doors is will enhance the look of the doll house. Build the doors out of 3/4″ plywood, making sure you follow the pattern described in the diagram.

Attaching the trims

Attaching the trims

Attach trims around the windows, in order to get the job done in a professional manner. Fit trims on both sides of the door, if you want to get a nice appearance.

Fitting the doors

Fitting the doors

Fit the doors into place and secure them to the side walls with piano hinges. Check if the doors open easily, before inserting the screws into place. In addition, fit knobs to the doors, in order to open and close them easily.

Free doll house plans

Free doll house plans

Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough to support the soil. Make sure there are no protruding screws or sharp edges.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.

 

 

This diy project was about doll house plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.







Get-Plans



Leave A Response »