Raised Flower Bed Plans

Thomas Comments Off

 

If you want to build a flower bed, we recommend you to read this article with attention and check out the related projects. There are many raised flower bed plans to choose from, so make sure you take several alternatives into account before starting the actual assembly. Plan the steps of the project from the beginning, as to save time and to keep the costs under control.

It is essential to invest in high quality materials, that are also weather-resistant, such as pine, redwood or cedar. In addition, you could also fit landscaping fabric to the interior faces of the flower bed, if you want to protect them against moisture. Align the components at both ends before inserting the screws. Add waterproof glue to the joints, in order to enhance the rigidity of the planter bed.

 

 

Raised Flower Bed Plans

Building a raised flower bed

Building a raised flower bed

 

  • 1 - 4 pieces of 2×4 lumber – 11 1/2″ POSTS
  • 2 - 2 pieces of 1×12 lumber – 43″ FACES
  • 3 - 2 pieces of 1×12 lumber – 71″ SIDES 
  • Hammer, Tape measure, Carpentry square
  • Miter saw, Drill machinery, Screwdriver, Sander, Router
  • Safety Gloves, Safety Glasses, Respiratory Mask
  • One day

 

 

Building a flower bed

Building the corner posts of the frame

Building the corner posts of the frame

The first step of the project is to build the legs of the planter. As you can easily notice in the image, we recommend you to cut out several grooves inside the piece of lumber, in order to fit the side walls easily. Work with attention and mark the cut lines before making the grooves with a circular saw. Repeat the process for the rest of the legs, in order to get the job done in a professional manner.

Building the sides of the flower bed

Building the sides of the flower bed

The next step of the project is to build the sides of the flower bed. Work with attention and cut out the top of the slats in a decorative manner. Smooth the cut edges with a piece of sandpaper or make them round with a router.

Fitting the side components

Fitting the side components

Build the side components of the flower bed using the information displayed in the plans. Cut the top of the slats in a decorative manner, by using a circular saw. Slide the slats into place and lock them to the corner posts with screws. Add waterproof glue to the joints, if you want to enhance the rigidity of the structure. Make sure the corners are right-angled before continuing the project.

Raised flower bed plans

Raised flower bed plans

Last but not least, you should take care of the finishing touches. Check if the components are secured into place properly and if the structure is rigid. Make sure there are no protruding screws or sharp edges that could injure you.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with 120-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay.

 

 

This diy project was about raised flower bed plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets. LIKE us on Facebook if you want to be the first that gets our latest projects.

Comments are closed.