Backyard Greenhouse Plans

Thomas Comments Off

 

If you want to learn more about building a backyard greenhouse, we recommend you to pay attention to the instructions described in the article. Work with attention and invest in high-quality materials if you want to get a professional result. There are many designs and plans to choose from when building a greenhouse, so you need to check out the rest of the projects before starting the construction.

Invest in pressure-treated lumber as you need to make sure the components are weather-resistant and durable. Take accurate measurements before adjusting the components to the right size and assembling them together. After building the structure, we recommend you to cover it with polyethylene foil or with poly-carbonate sheets. Set the door into place and fit a latch to keep it closed.

 

RELATED PROJECTS:

Lean to greenhouse plans

Mini-greenhouse plans

 

 

Building a backyard greenhouse

Building a backyard greenhouse

Building a backyard greenhouse

 

  • 1 – 2 pieces of 2×4 lumber – 120′, 2 pieces of 2×6 lumber – 120″, 8 pieces – 84 1/4″ SIDE WALLS
  • 2 – 2 pieces of 2×4 lumber – 89″, 2 pieces – 66″, 4 pieces – 80″ WALLS
  • 3 – 1 pieces of 2×6 lumber – 120″ TOP BEAM
  • 4 – 8 pieces of 2×4 lumber – 40 3/4″, 2 pieces – 36 3/4″ RAFTERS
  • 5 – 2 pieces of 2×4 lumber – 32″, 2 pieces – 75″, 1 piece – 25″ DOOR 
  • Hammer, Tape measure, Carpentry square
  • Miter saw, Drill machinery, Screwdriver, Sander, Router
  • Safety Gloves, Safety Glasses, Respiratory Mask
  • One day

 

 

Backyard Greenhouse Plans

Building the side walls

Building the side walls

The first step of the backyard project is to build the side walls. In order to get the job done in a professional manner, we recommend you to cut the components in a professional manner and to lock them together with 2 1/2″ screws. Drill pilot holes through the plates before inserting the screws, to prevent the wood from splitting. Keep the studs equally-spaced, in order to create a rigid structure.

Fitting the side walls

Fitting the side walls

Select a level surface and install the walls into place, as shown in the image. Align the walls at both ends and secure them with temporarily braces. Make sure the connections are rigid, otherwise the walls might move from position.

Building the front and back walls

Building the front and back walls

Continue the project by fitting the front and the back walls. As you notice in the plans, you need to plumb the studs before fitting them to the bottom and top plates. Check if the corners are right-angled before fitting the galvanized screws.

Building the rafters

Building the rafters

Building the rafters is the next step of the woodworking project. Cut the 2×4 rafters at the right size and lock them to the top beam (2×6 lumber). Make sure you cut the ends of the rafters at the right angles if you want to get the job done in a professional manner. Attach horizontal braces to the rafters placed at both ends of the roof.

Attaching the rafters

Attaching the rafters

It is important to keep the rafters equally-spaced, so make sure you take accurate measurements before inserting the screws into the plates. Work with attention and with great care, in order to get a professional result.

Building the door

Building the door

One of the last steps of the greenhouse project is to build the front door. In order to get the job done in a professional manner, we recommend you to assemble the door using the information shown in the diagram. Check if the corners are right-angled before fitting the door into the door opening. Use metal hinges to lock the door into place.

Backyard greenhouse plans

Backyard greenhouse plans

Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough to support the soil. Make sure there are no protruding screws or sharp edges.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.

 

 

This diy project was about backyard greenhouse plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.

Comments are closed.