Gazebo Railings Plans

Thomas Comments Off

 

Step by step project about gazebo railings plans. Building wooden railings for a gazebo is a straight forward woodworking project, but you need to work with attention and invest in the best quality materials you could afford. Always plan everything from the very beginning and adjust the size and the shape of the railings to your needs. Use cedar, pine or redwood, if you want to get a professional result.

Before building the simple railings for your gazebo, there are a few things that you should take into account. First of all, we recommend you to choose a designs that matches the style of your house and of the rest of the constructions on your property. You can use basic balusters, plexiglass or even deck balusters, so make sure you study this aspect before taking the final decision.

 

TABLE OF CONTENTS:

Part 1: Garden Gazebo Plans

Part 2: Gazebo roof plans

Part 3: Gazebo railings plans

 

 

Building gazebo railings

Building gazebo railings

Building gazebo railings

 

  • 1 – 12 pieces of 2×4 lumber – 65 1/4″ CLEATS
  • 2 – 6 pieces of 2×4 lumber – 65 1/4” HANDRAILS
  • 3 – 22 pieces of 2×2 lumber – 27″ BALUSTERS 
  • Hammer, Tape measure, Carpentry square
  • Miter saw, Drill machinery, Screwdriver, Sander, Router
  • Safety Gloves, Safety Glasses, Respiratory Mask
  • One day

 

 

Gazebo Railings Plans

Attaching the supports

Attaching the supports

The first step of the project is to attach the 2×4 cleats between the posts, as in the image. In order to get the job done as a professional, we recommend you to drill pocket holes at both ends of the cleats. Level the cleats with a spirit level and adjust their height, before inserting the galvanized screws into the posts.

Fitting the rails

Fitting the rails

The next step of the project is to fit the 2×4 rails to the top of the cleats, as in the free plans. Align the components at both ends and lock it to the cleats with finishing nails and waterproof glue.

Attaching the balusters

Attaching the balusters

One of the last steps of the woodworking project is to attach the 2×2 balusters to the cleats. Drill pilot holes trough the balusters and insert 2 1/2″ screws into the cleats. Align the balusters at both ends and place a wood block between them, if you want to create even gaps. Work with attention and with great care, making sure you adjust the distance between the balusters to your needs.

Gazebo rails plans

Gazebo rails plans

Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid. Make sure there are no protruding screws or sharp edges.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Round the exposed edges of the rails with a router and a 1/4″ bit.  Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project, to see how to build the frame as well as the railings.

 

 

This diy project was about gazebo roof plans. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.

 <<<< PREVIOUS  |  NEXT >>>>

Comments are closed.