Wooden Bench Plans

Thomas 0

If you want to learn more about wooden bench plans, we recommend you to pay attention to the instructions described in the article. Select the right plans for your needs before starting the actual construction project. There are so many designs and plans to choose from, that we really recommend you to browse through the related plans before buying the materials and starting the assembly.

If you want to get the job done in a professional manner, we recommend you to plan everything with attention, as to prevent costly mistakes and to build a professional bench. Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather. Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather.

 

 

RELATED PLANS:

Simple Bench Plans

Deck Bench Plans

How to build a garden bench

 

 

 Wooden Bench Plans

Building a bench

Building a bench

 

  • 1 – 2 pieces of 2×10 lumber – 14” LEGS
  • 2 – 1 pieces of 2×6 lumber – 29″ STRETCHER
  • 3 – 2 pieces of 2×12 lumber – 40″ SEAT 
  • One day

 

 

Building a wooden bench

Building the legs of the bench

Building the legs of the bench

The first step of the woodworking project is to build the legs for the wooden bench. In order to get the job done in a professional manner, we recommend you to mark the cut lines on the legs and the get the job done with a circular saw. Smooth the edges with sandpaper and remove the residues with a vacuum.

Fitting the stretcher

Fitting the stretcher

Drill pocket holes at both ends of the wooden stretcher and secure them to the legs by inserting 2 1/2″ galvanized screws. Make sure the corners are square and leave no gaps between the components. Add glue to enhance the rigidity of the structure. Drill pocket holes along the top edge of the stretcher using a jig.

Building the seat

Building the seat

If you want to get the job done in a professional manner, we recommend you to make the seat of the bench in a professional manner. Mark the cut lines on the piece of lumber and get the job done with a circular saw. Smooth the edges with sandpaper.

Fitting the seat

Fitting the seat

Center the frame of the bench to the seat and insert 2 1/2″ screws through the stretcher into the sea. Make sure you leave no gaps between the components and add glue to enhance the rigidity of the joints.

Wooden bench plans

Wooden bench plans

Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough for your garden. Make sure there are no protruding screws or sharp edges.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.

 

 

This diy project was about wooden bench plans. If you have enjoyed the free project, we recommend you to LIKE and SHARE it with your friends, by using the social media widgets.







Get-Plans



Leave A Response »