Picnic Bench Plans

Thomas Comments Off

 

If you want to learn more about building a picnic bench, we recommend you to pay attention to the instructions described in the article. Select the right picnic bench plans for your needs before starting the actual construction project. There are so many designs and plans to choose from, that we really recommend you to browse through the related plans before buying the materials and starting the assembly. Work with attention and invest in high quality materials.

If you want to get the job done in a professional manner, we recommend you to plan everything with attention, as to prevent costly mistakes and to build a professional bench. Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather. Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather.

 

RELATED PLANS:

Simple Bench Plans

Deck Bench Plans

How to build a garden bench

 

 

Picnic Bench Plans

Building a picnic bench

Building a picnic bench

 

  • 1 – 2 pieces of 2×12 lumber – 15” LEGS
  • 2 – 1 pieces of 2×6 lumber – 39″ STRETCHER
  • 3 – 2 pieces of 2×12 lumber – 48″ SEAT 
  • Hammer, Tape measure, Carpentry square
  • Miter saw, Drill machinery, Screwdriver, Sander, Router
  • Safety Gloves, Safety Glasses, Respiratory Mask
  • One day

 

 

Building a picnic bench

Building the legs

Building the legs

The first step of the project is to build the legs of the picnic bench. Cut the components out of 2×12 lumber and make sure you cut out the notch at the bottom of the legs, in order to get the job done in a professional manner. Smooth the cut edges with sandpaper, as to get a professional result.

Fitting the seat support

Fitting the seat support

Drill pocket holes at both ends of the stretcher and secure it to the legs, by using 2 1/2″ screws. Add waterproof glue to the joints and make sure the corners are right-angled. Center the stretcher to the legs, in order to get a symmetrical look.

Attaching the seat

Attaching the seat

Cut the seat out of 2×12 lumber and make the corners decorative, in order to get a professional appearance. Smooth the cut edges with sandpaper and remove the residues thoroughly.

Picnic table plans

Picnic table plans

Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough for your garden. Make sure there are no protruding screws or sharp edges.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.

 

 

This diy project was about picnic bench plans. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.

Comments are closed.