Free Coffee Table Plans

Thomas 0

If you want to learn more about building a coffee table, we recommend you to pay attention to the instructions described in the article. Select the right free coffee table plans for yoru needs before starting the actual construction project. There are so many designs and plans to choose from, that we really recommend you to browse through the related plans before buying the materials and starting the assembly. Work with attention and invest in high quality materials.

If you want to get the job done in a professional manner, we recommend you to plan everything with attention, as to prevent costly mistakes and to build a professional bench. Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather. Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather.

 

 

Free Coffee Table Plans

Building a coffee table

Building a coffee table

 

  • 1 – 4 pieces of 1×4 lumber – 15 1/4” LEGS
  • 2 – 4 pieces of 1×4 lumber – 17 3/4″ FRAME
  • 3 – 3 pieces of 1×4 lumber – 35″ APRONS
  • 4 – 4 pieces of 2×4 lumber – 3 1/2″ SUPPORTS
  • 5 – 8 pieces of 1×3 lumber – 48″, 2 pieces of 1×2 lumber – 19 1/4″ TABLETOP
  • One day

 

 

Building a coffee table

Building the sides of the table

Building the sides of the table

The first step of the woodworking project is to build the sides of the coffee table. Cut the components out of 1×4 lumber, making sure you take accurate measurements and use a professional saw. Drill pocket holes at both ends of the horizontal components and secure them to the legs, after making sure you align them properly. Add glue to the joints, as to enhance the rigidity of the coffee table.

Fitting the side components

Fitting the side components

Continue the woodworking project by at attaching the aprons to the sides of the table. Make sure the corners are square and lock the aprons to the legs with galvanized screws. Add glue to the joints, in order to get the job done in a professional manner.

Fitting the corner supports

Fitting the corner supports

Cut the corners supports out of 2×4 lumber and secure them to the table with galvanized screws. Drill pilot holes through the supports before attaching them to the frame, in order to get a professional result.

Building the tabletop

Building the tabletop

Build the tabletop of the coffee table using 1×4 slats and 1×2 supports. Lay the slats on a level surface, making sure they are equally-spaced and lock them together with the 1×2 supports. Make sure you create a rigid structure, otherwise the end result won’t raise up to your expectations.

Attaching the tabletop

Attaching the tabletop

Center the frame of the table to the tabletop, making sure you pay attention to the instructions described in the diagram. Drill pilot holes through the supports and insert 2 1/2″ screws into the frame. Leave no gaps between the components.

Free coffee table plans

Free coffee table plans

Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough for your garden. Make sure there are no protruding screws or sharp edges.

PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.

 

 

This diy project was about coffee table plans free. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.






Get-Plans



Leave A Response »