If you want to learn more about how to build a suet birdfeeder, we recommend you to pay attention to the instructions described in the article. Select the right simple bird feeder plans for your needs before starting the actual construction project. There are so many designs and plans to choose from, that we really recommend you to browse through the related plans before buying the materials and starting the assembly. Work with attention and invest in high quality materials.
If you want to get the job done in a professional manner, we recommend you to plan everything with attention, as to prevent costly mistakes and to build a professional bench. Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather. Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather.
Simple Birdfeeder Plans
- 1 – 1 pieces of 1×6 lumber – 10 1/2” BACK
- 2 – 2 pieces of 1×3 lumber – 5 1/2″ BOTTOM
- 3 – 2 pieces of 1×3 lumber – 11 1/2″ SIDES
- 4 – 2 pieces of 1×2 lumber – 7″ RAILS
- 5 – 1 piece of 1×6 lumber – 7″ ROOF
- One day
Building a suet birdfeeder
The first step of the project is to build the frame of the bird feeder. Therefore, we recommend you to build the back of the structure out of 1×6 lumber and the bottom component out of 1×3 lumber. Take accurate measurements and adjust the width of the bottom to 1 3/4″, by using a circular saw.
Continue the project by making the two sides of the box. Therefore, mark the cut lines on the 1×3 slats and make the cuts with an appropriate saw. Smooth the edges with sandpaper and remove the residues with a clean cloth.
Continue woodworking project by attaching the sides to the structure. Align the components with great care, making sure you leave no gaps between them. Add glue to the joints and remove the excess with a damp cloth.
Cut a piece of 1×6 lumber at the dimensions illustrated in the diagram and attach it to the frame of the bird feeder. Align the component with great care secure it to the frame with finishing nails.
Fit the 1×2 rails to the front of the bird feeder, as shown in the image. Drill pilot holes through the rails before securing them into place. Smooth the edges with fine-grit sandpaper.
Last but not least, you should take care of the finishing touches. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough for your garden. Make sure there are no protruding screws or sharp edges.
PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Apply several coats of paint or stain over the components, in order to protect them from decay. Check out the rest of the project to learn more about building garden projects.
This diy project was about simple birdfeeder plans. If you have enjoyed the free project, we recommend you to LIKE and SHARE it with your friends, by using the social media widgets.